A vibrating conveyor is a continuous conveying machine that uses a vibrator to vibrate a trough so that the material in the trough slides or is thrown in a certain direction. It is mainly composed of a vibration exciter, a bearing groove, a main vibration spring and a frame. Can be used to transport a variety of loose materials horizontally, gently or vertically.
The vibrating conveyor is used for material conveying by means of reciprocating vibration of the conveying trough. It is a continuous conveying equipment of non-flexible traction members. It can transport granular or block loose materials horizontally or obliquely, and can also be used to transport powder.
The inertial vibration conveyor is driven by the inertial excitation force generated by the inertia exciter. The inertia exciter is mainly composed of an eccentric block, a main shaft, a bearing, a bearing seat, a chute, etc., and a centrifugally varying inertial force generated by the eccentric block rotating periodically excites the chute vibration. This centrifugal inertial force is the excitation force.
The eccentric block of the inertia exciter generates a large inertia force when rotated, and the structure is simple and compact. According to the number of spindles, it can be divided into a single-axis inertial vibration conveyor and a two-axis inertial vibration conveyor.
Note on the installation and use of inertial vibrating conveyor：
1. Before the empty running test, check the bolts of each part, especially the anchor bolts of the vibration motor. After 4 hours of continuous operation, the bolts of each part should be tightened once again, and tightened 2-3 times within one week.
2. The rotation direction of the two vibration motors should be opposite when working.
3. When the air test is running, check whether the conveyor is running smoothly, and pay attention to the temperature rise of the vibration motor bearing. After 4 hours of continuous operation, the maximum temperature of the bearing must not exceed 75 °C.
Inertial vibrating conveyor has the advantages of simple structure, light weight, low noise, reliable operation, no dust pollution, convenient installation and maintenance, etc. It has been widely used in metallurgy, mining, coal, building materials, chemical, food and other industries.