PSL300-18-4000 vibrating conveyor
PSL300-18-4000 type fully balanced vibrating conveyor is a short-distance conveyor with a small width of the trough. It is designed to transport 18 tons per hour, and the maximum rated length is 3 meters. The width of the trough 0.3 meters.
PSL300-18-4000 type fully balanced vibrating conveyor has the shock absorption effect that other forms of vibration conveyor can not have, the inertial vibration force transmitted to the foundation is small and the noise is low; it can be installed on the floor or steel structure..
In addition to the advantages of the dual mass resonance type, its most prominent advantage is that the inertial vibration force (dynamic load) transmitted to the foundation is very small and the noise is low. It has other types of vibration transmission when installed on the floor surface or steel structure bracket The machine has unparalleled shock absorption advantages.
PSL300-18-4000 type fully balanced vibrating conveyor
Conveying capacity (T / H)
Conveying trough width (mm)
Conveying trough length (mm)
Motor power (Kw)
1. The calculation of the transportation volume is calculated according to the horizontal transportation of river sand (heap density 1.6t/m3, water content 5%).
2. The power of the tank body should be recalculated when installing the sealing cover, the lining plate and conveying the materials of different bulk density.
3. When the conveying distance exceeds 15 meters, the segmented structure is adopted, and the site is assembled and connected.
4.For the explanation of model PSL300-18-4000, the first number refers to the slot width, the second number refers to the conveying capacity, and the third number refers to the slot length.
PSL300-18-4000 type fully balanced vibrating conveyor has simple structure, few lubricating parts, convenient installation and adjustment, low maintenance workload, low energy consumption, safe operation and easy automation control.
PSL300-18-4000 type fully balanced vibrating conveyor is suitable for many industries, including biomass, recycling, pellet manufacturing, sawmills, plywood, OSB, food processing and agriculture.
During the use of the vibrating conveyor, it is necessary to regularly apply grease (No. 3 calcium-based grease) to the bearing housing and the connecting rod bearing of the drive mechanism.
Continuous operation is repeated every two weeks, and non-continuous operation is filled once a month.
Always check the fastening of each fastener and replace consumables (plate springs, coil springs, rubber springs and fasteners) for long-term damage (fatigue, defects, aging wear).
It is strictly forbidden to operate with illness.
Pay attention to check the temperature rise (feel) of the bearing part of the drive mechanism
If an abnormality is found, it must be stopped immediately for inspection.