SSL300-18-5000 vibration conveyor
Nantong United Heavy Machinery Co.,LTD. specializes in producing resonant vibration conveyors. The machine has good shock absorption effect and is suitable for installation on floor slabs and steel structure supports.
The structure is relatively simple, the body rigidity is high, the overall height is low, easy to install, easy to maintain.
Long transmission distance, energy consumption less than 75dB, noise less than 75dB, easy to arrange and improve working environment.
The guide support swing rod is made of steel plate, and the upper and lower masses are connected by an elastic hinge with a special structure, which is firm and reliable.
A screen is installed in the conveying tank body, which can realize the grading of the material at the same time of conveying; the tank body with a sealed structure can be used to achieve clean conveying and prevent dust from flying.
The conveying tank body and the equipment chassis are connected by a resonance spring to form a resonance system. The motor and the eccentric link excitation system are installed on the chassis, and the vibration force is transmitted to the conveying tank through the elastic link system, causing the conveying tank body and the bottom For the resonance of the chassis, since the mass of the chassis is larger than that of the transport tank, the transport tank and the chassis are in a stable near-resonance working state, and the system tuning value can be flexibly adjusted by increasing or decreasing the chassis weight and spring stiffness to target different densities The material and conveying volume get the ideal working condition.
Because the vibration amplitude of the chassis is significantly smaller than the vibration amplitude of the conveyor tank, and the vibration force of the conveyor tank and the chassis basically cancel each other, the reaction force generated during the operation of the equipment is relatively small, which is transmitted to the shock absorber system after isolation. The reaction force of the foundation will be further reduced, so the SSL300-18-5000 resonance vibration conveyor has no special requirements for the installation foundation.
The SSL300-18-5000 resonant vibration conveyor are widely used in metallurgy, chemical industry, building materials, food, environmental protection and other industries due to their efficient and accurate conveying capacity.
PSL300-18-5000 type fully balanced vibrating conveyor
Conveying capacity (T / H)
Conveying trough width (mm)
Conveying trough length (mm)
Motor power (Kw)
1. The calculation of the transportation volume is calculated according to the horizontal transportation of river sand (heap density 1.6t/m3, water content 5%).
2. The power of the tank body should be recalculated when installing the sealing cover, the lining plate and conveying the materials of different bulk density.
3. When the conveying distance exceeds 15 meters, the segmented structure is adopted, and the site is assembled and connected.
4.For the explanation of model PSL300-18-5000, the first number refers to the slot width, the second number refers to the conveying capacity, and the third number refers to the slot length.
Installation and use:
Since the vibration amplitude of the chassis is significantly smaller than the vibration amplitude of the conveying trough body, and the vibration forces of the conveying trough body and the chassis substantially cancel each other, the reaction force generated in the working of the equipment is relatively small, and after being isolated by the damping system, it is transmitted to The base reaction force is further reduced, so this type of conveyor has no special requirements for the installation base.
The SSL300-18-5000 resonant vibration conveyors are not suitable for conveying viscous materials.